Technology & details
AYERS Five Wireless: Technology that inspires
- High-precision DDFA power amplifiers: The direct control of each driver results in enormous
control and precision, which, in combination with a system output of 500 watts, ensures
dynamic and powerful music reproduction.
- Deep Bass Performance: The combination of two 18 cm long-throw woofers, active
technology and a generously dimensioned bass reflex port enables remarkably accurate and
deep bass down to 28 Hz.
- Melt in the midrange: The Five uses a special 55 mm silk midrange dome – also called a
"bear's nose" – for open and clear midranges
- Clear highs: A 22 mm silk dome tweeter with neodymium drive delivers clean and detailed
highs without sounding too sharp.
- Digital signal processing: The precise DSP filtering of the chassis and high-resolution signal
processing (up to 24 bit/192 kHz) ensure optimal sound quality.
- Protected electronics: The DDFA power amplifiers are housed in a separate, enclosed area of the box to protect them from pressure fluctuations.
The AYERS Five Wireless offers dynamic, detailed and spatial sound that exceeds market standards. Thanks to precise DDFA power amplifiers and active 3-way design, it delivers an impressive listening experience at any volume. Operation is particularly easy and intuitive in combination with the HD 10 Stream Connect.
Downloads
Instruction manual
All models in the series
-
AYERS Three WirelessRoom size small, up to 25 m² -
AYERS Center Passive PlusRoom size small to large -
AYERS Five Passive Pluslarge, from 30 m² -
AYERS Four Passive PlusRoom size medium, from 15 up to 40 m² -
AYERS Three Passive PlusRoom size small, up to 25 m² -
AYERS Four WirelessRoom size medium, up to 40 m² -
AYERS One Passive PlusRoom size small, up to 25 m² -
AYERS One WirelessRoom size small, up to 25 m²
This fits well
Reviews
Reviews
-
Spitzenklang - bester ServiceHervorragende audiophile Lautsprecher aus Deutschland zu einem fairen Preis. Und echte Ansprechpartner für Updates, Aufstellung und Klangtipps.
So stelle ich mir Hifi-Kompetenz vor.Posted on
-
**********
Posted on
-
Klasse BeratungKlasse Beratung, sehr gute Kundenbetreuung, edle Produkte. Habe meinen Kauf zu keinem Zeitpunkt bereut.
Posted on
Frequently asked questions about the AYERS Five Wireless
Sound – What are the sonic highlights of the AYERS Five Wireless?
The sonic highlights of the AYERS Five Wireless floor-standing speaker include:
- A very deep, dry, and dynamic bass reproduction, with impressive power and precision.
- A long-term suitable, fatigue-free sound profile that allows for hours of music enjoyment.
- Impressive detail reproduction without sounding sharp or harsh.
- A very wide dispersion, ideal for modern floor plans, ensuring music sounds complete and engaging even outside the ideal listening position.
- Impressive soundstage imaging, which allows artists to be localized across the width and depth of the room, especially in the vocal range due to the 55 mm silk midrange dome.
- A complete sound image even at low volume.
Difference from AYERS Four – What is the difference between the AYERS Five Wireless and the AYERS Four Wireless?
The difference between the AYERS Five Wireless and the AYERS Four lies in the size of the woofers.
The AYERS Four is designed for medium-sized rooms from 15 sqm up to a maximum of 40 sqm, while the AYERS Five can comfortably fill rooms over 40 sqm.
The sound profile, including the mid-range and high-frequency areas, is identical.
Therefore, when making your selection, you can primarily focus on the size of your listening area.
Speaker Placement – What are important aspects for placing the AYERS Five Wireless?
There are only a few key aspects for placing the AYERS Five Wireless floor-standing speaker, as we designed the product to be particularly straightforward in its placement.
These include:
- A recommended wall distance of 20 – 50 cm depending on the spatial conditions.
- Placement in a classic stereo triangle, which can also be narrower.
- This means the speakers can be closer together than the listening position is distant.
- Only a very slight toe-in of the speakers towards the listening position (approx. 5 degrees) for ideal soundstage imaging.
- You can adapt the speaker's sound profile to your placement and room using the selectable room EQs (Free, Wall, and Dynamic) on the amplifier module.
Wall-Near Placement – How far should the AYERS Five Wireless be from the wall?
We recommend a minimum distance of 20 cm from the wall for this large floor-standing speaker.
Ideal values have been found to be between 30 – 50 cm.
You can adapt the speaker's sound profile to your placement and room using the selectable room EQs (Free, Wall, and Dynamic) on the amplifier module.
Room Size – What room size is the AYERS Five Wireless floor-standing speaker suitable for?
The AYERS Five Wireless can comfortably fill listening areas from 30 sqm up to 60 sqm.
Small Rooms – Can I also use the AYERS Five Wireless in small rooms?
Using the AYERS Five Wireless in rooms under 30 sqm is not ideal, as the speaker's bass performance will overwhelm the room.
While the bass output can be reduced using the selectable "Wall" room EQ on the amplifier module, in this case, the AYERS Four Wireless is still our recommendation.
Subwoofer – Can I use the AYERS Five Wireless in combination with a subwoofer?
This is possible, but not necessarily required due to the AYERS Five Wireless's high deep bass performance.
It would be beneficial in very large rooms over 60 sqm.
Power Supply – Is it possible to operate the AYERS Five Wireless without a power connection?
No, the AYERS Five Wireless requires a 230V power connection for operation.
Battery operation is not provided for these products.
Connections – What connection options are available on the AYERS Five Wireless active floor-standing speaker?
The AYERS Five Wireless offers a variety of connection options:
- Wireless input with wireless, digital, and lossless signal transmission in combination with the HD 10 Stream Connect.
- Wired via analog input for connecting a preamplifier with an RCA signal cable.
- Wired via optical digital input for connecting a streamer or preamplifier that has volume-controlled optical digital outputs.
- Wired via coaxial digital input for connecting a streamer or preamplifier that has volume-controlled coaxial digital outputs.
Wireless Operation – Can I also operate the AYERS Five Wireless wirelessly with other streamers?
The wireless operation of the AYERS Five is only possible with our HD 10 Stream Connect.
Other preamplifiers or streaming preamplifiers can be used when connected via cable.
Wireless Operation Distance – How far can the AYERS Five Wireless be from the HD 10 Stream Connect?
With a direct line of sight between the HD 10 Stream Connect and the AYERS Five Wireless, there is a range of up to 10 meters.
If the connection is interrupted by walls, this is reduced to approximately 4 meters.
Integrating the 2nd Speaker – How does the music signal reach the second speaker in digital wired operation?
If your streamer or preamplifier does not have two volume-controlled digital outputs, you can loop through the digital music signal (optical or coaxial) from the digital outputs on the amplifier module to the second speaker.
Corresponding digital pass-through outputs are available for this purpose. An optical or coaxial digital cable is required.
Number of Amplifiers – Are both AYERS Five Wireless speakers equipped with an amplifier?
Yes, both speakers in a pair are active and each is equipped with four DDFA amplifiers.
This means each speaker features powerful quad-amping, providing a system output of up to 500 watts.
Power On/Off – How do the power amplifiers of the AYERS Five Wireless turn on and off?
In wireless mode, the AYERS Five Wireless receives a digital on/off command from the HD 10 Stream Connect.
In wired operation, the power amplifiers automatically turn on when a music signal is present and turn off when no signal is detected.
Direct Connection of Source Devices – Can I connect a turntable, TV, or CD player directly to the AYERS Five Wireless?
This is not intended. For connecting external source devices, please use the HD 10 Stream Connect, which then wirelessly transmits the music signal digitally to the AYERS Five Wireless.
The HD 10 Stream Connect offers 4 analog and digital inputs, including HDMI ARC.
Alternatively, you can connect a preamplifier to the AYERS Five Wireless via cable.
Bluetooth – Can I stream directly to the AYERS Five Wireless via Bluetooth?
No, this is not possible. The AYERS Five Wireless and its accompanying HD 10 Stream Connect are part of a high-res structure that operates via "network streaming."
They receive their high-resolution music data directly from the internet.
The music data is transmitted immediately to the HD 10 and then wirelessly sent from there to the AYERS Five Wireless.
If needed, a Bluetooth connection is available on the HD 10 Stream Connect, but it plays a qualitatively subordinate role.
Scope of Delivery – Are power cables included with the AYERS Five Wireless?
Yes, these are included as standard and can be configured in the following lengths: 0.5 m, 1.0 m, 1.8 m, 3.0 m, and 5.0 m.
They can be selected in different lengths for the left and right speakers.
Delivery – Which shipping method is used for the AYERS Five Wireless?
The AYERS Five Wireless is delivered as a pair, standing on a half-pallet, via freight forwarding by our partner freight forwarder.
Shipping is free within Germany.
Delivery Weight – How heavy is the AYERS Five Wireless, and can I carry it alone?
The AYERS Five Wireless has a packaged weight of approximately 30 kg.
We recommend carrying the speaker with two people.